Jobs for fresh graduate
-
Hi, Im a fresh mechanical engineering graduate from an American university (ABET) from the middle east. I heard that Canada is a great place to live, and since im a foreigner in the country where im living, im not entitled to get any of the privileges that the nationals get, and also they dont give nationality to foreigners no matter how long you live, so i'll just be a foreigner here all my life. So, my question is how easy it is for foreigners to get jobs (who is a fresh graduate).
29 août 2008, 03:46 Confused
Réponses
-
COMPUTER
SIR I M FRESH GRADUATE,
ZULFIQAR 30 août 2008, 11:37 - Signaler un abus -
COMPUTER
MY NAME IS ZULFIQAR ALI I M PASSING BSIT 4YEAR,
MY E-MAIL ADDRESS [email removed]ZULFIQAR 30 août 2008, 11:39 - Signaler un abus -
mechanica engieer
IMRAN KHAN
Block No: CPO/14 Q#159
Hanif SRE PNS Karsaz Karachi, Pakistan
Contact no: 0345-2636040
E mail:[email removed]
---------------------------------------------------------------------------------------------------------------------
POST FOR APPLY: MECHANICAL ENGINEER/TRAINEE/ASSIATANT
OBJECTIVE: To work for a challenging company which offers professional development and growth potential and to further build upon my academic training and experience to benefit the employer and advance my career
QUALIFICATIONS SUMMARY:
B.E Mechanical Engineering (CGPA 2.91/73%) 2005_2008
5th position in class and first position in final year project
National university of Science and Technology (NUST)
F.S c Pre-engineering (A- Grade) 2001_2003
Govt Degree College Stadium Road Karachi.
Matriculation (A- Grade) 2000_2001
PN Boys Sec School karsaz
EXPERIENCE
AS INTERNEE ENGINEER):
PAKISTAN STEEL MILL PRODUCTION (DECEMBER 2006 TO JANUARY 2007)
It is the largest steel production plant in Pakistan. It involves more than 50 process units with a workforce of 15000 peoples. There I learned about
• Planning and scheduling ,Study of drawing, redesigning of damage parts plant, in mechanical repair workshop
• Working of lathe, milling, shaper and grinding machines, Welding, casting and heat treatment processes and furnaces
• Knowledge about compressor, pumps, chillers and refrigeration system
HINOPAK MOTORS LTD (JULY 2007 TO AUGUST 2007):
HinoPak Motors Ltd is a multinational automobile company. I interned there in Quality Control Department. I researched and prepared a Supplier’s Quality Control Manual “SQCM”
• Knowledge about quality control &quality assurance procedures and ISO-9000
• Worked on the design of jigs by using Solid Edge for quality inspections of different parts made by local venders.
• Learned about testing tools and techniques used for inspection of parts
BIN QASIM AREA THERMAL POWER PLANT POWER PLANT:
This thermal power is situated inside the premises of Pakistan Steel Mills. This plant has the capacity of producing more than (165 MW) electricity with multistage turbine cycles. I interned there period of one month
There where I have learned a lot about the power plant working cycle and turbine boiler technology, Operation control room.
PROJECTS:
FINAL SEMESTER PROJECT:
Designed and fabrication of ANTHROPOMORPHIC (HUMANOID) ARM with a hand.
It is very much similar to human hand and capable of performing different types of human grasping and motion. It can automatically pick an object anywhere place within its workstation.
Our project has been awarded 1st position among 9 best projects,
MINI PROJECTS OR SEMESTER PROJECTS:
• Development of MATRIX Solver in C-Language
• Designing of 3_D CAD MODEL OF MOTOR BIKE using SOLID-EDGE
• Designing and Manufacture of VARIABLE POWER SUPPLY
• Design and fabrication of pressure measuring instrument
COMPUTER SKILLS:
• Expert in Microsoft office, (MS Excel, MS World, power point)
• Full command at mechanical designing software Solid Edge (2D and 3D designing)
• Familiar with orthogonal & isometric drafting in AutoCAD
• C-language& FORTRAN language.
• Some knowledge Matematica, Matlab, EES
• MS Windows 95/98/NT/2000/XP
MAJOR SUBJECT:
Engineering Mechanics
Thermodynamics &Heat transfer
Manufacturing Processes
Design of machine elements
Refrigeration & air conditioning
Fluid & Gas Dynamics
Metallurgy /material science
Industrial Management
LANGUAGES:
I have full command in English, Urdu Hindku and Punjabi languages
ACHEVMENTS:
• Get admission in NUST by competing among 50000 students on all Pakistan bases.
• Final year project has been awarded 1st position.
• Captain of Cricket team of during my school and college
• Get the 1st position thought in my school education & SSC board examination in my school.
REFERENCE:
References will be available on request.pakistan 05 sept 2008, 08:34 - Signaler un abus -
HEINEKEN JOB OFFER
From The Desk of The Human Res.Manager
Heineken Center, York Road,
LONDON, SE1 7NA.
Tel: +447024074679
Attn:
In view of your qualifications and vast experiences as contained on your online posted resume, Heineken bottling Company Limited, wishes to secure your services for her current ambitious onshore/offshore contracts. If you are currently available and wish to proceed with this opportunity, please send your updated resume to us via ([email removed])([email removed]).
The JOB ID: CONT/SPCLTD/0086
Best regards,
Edward Frank
For Heineken Bottling Co. Ltd.
LondonEdward Frank 26 sept 2008, 10:42 - Signaler un abus -
Hi i am a quantitative mngt and maths graduate
Hi my name is Edzai Conilias Zvobwo. I am a graduate with an Hnours in Mathematics,currently I am finishing off Quantitative Management with UNISA in South Africa,the problem is I am foreigner and I am not getting offers because of that.CURRICULUM VITAE
SURNAME: ZVOBWO
NAMES: EDZAI CONILIAS
SEX: MALE
DATE OF BIRTH: 21 JANUARY 1982
MARITAL STATUS: SINGLE
PASSPORT NUMBER: AN479265
WORK PERMIT NUMBER: A002216575
LANGUAGES: ENGLISH, SHONA, FRENCH
POSTAL ADDRESS: P.O.BOX 4730
HALFWAY HOUSE
1685
CELL NUMBER: +2778 585 8937
E-MAIL: [email removed]
CURRENT STUDIES
INSTITUTION: UNISA
PROGRAMME: BCOM QUANTITATIVE MANAGEMENT
MODULES:
• FINANCIAL RISK MANAGEMENT
• MODELS FOR STRATEGIC DECISION MAKING
• SIMULATION
• OPTIMISATION OF RESOURCES
ACADEMIC QULIFICATIONS
INSTITUTION: UNIVERSITY OF ZIMBABWE
PROGRAMME: BSC HONOURS IN MATHEMATICS
MODULES:
• DISSERTATION: THE POWER AND ASYMPTOTIC SERIES OF AIRY FUNCTIONS
• NUMERICAL SOLUTIONS TO PDE`S
• PERTUBATION THEORY
• PARTIAL DIFFERENTIAL EQUATIONS
• COMPLEX ANALYSIS
• REAL ANLYSIS
• INTRODUCTION TO FLUID MECHANICS
• COMPLEX VARIABLE
• PDE`S AND FOURIER SERIES
• ANALYSIS 2
• INTRODUCTION TO MATHEMATICAL MODELLING
• OPTIMIZATION
• MECHANICS
• NUMERICAL METHODS
• ORDINARY DIFERRENTIAL EQUATIONS
• VECTOR CALCULUS
• LINEAR MATHEMATICS 2
• ANALYSIS 1
• APPLIED STATISTICS 2
• APPLIED STATISTICS 1
• PROBABILITY THEORY 1
• STATISTICAL INFERENCE 1
• ATOMIC AND NUCLEAR PHYSICS 1
• THERMAL PHYSICS AND WAVE MOTIN
• MECHANICS AND OSCILLATIONS
• ELECTRICITY AND MAGNETISM
• MATHEMATICAL DISCOURSE
• CALCULUS 2
• LINEAR MATHEMATICS 1
• CALCULUS 1
• COMMUNICATION SKILLS SCIENCE
GCE ADVANCED LEVEL
MATHEMATICS
PHYSICS
CHEMISTRY
GENERAL PAPER
GCSE CAMBRIDGE ORDINARY LEVEL
PHYSICAL SCIENCE
INTEGRATED SCIENCE
LITERATURE IN ENGLISH
GEOGRAPHY
MATHEMATICS
BIOLOGY
ENGLISH LANGUAGE
SHONA LANGUAGE
FRENCH LANGUAGE
COMPUTER LITERACY
STATISTICAL PACKAGES: MINITAB, SPSS,SAS
MATHEMATICAL PACKAGES: MATLAB; TEXSHELL
OPERATIONS RESEARCH: @RISK, LINDO, LINGO, PASCAL PROGRAMMING, DELPHI, TURBO PASCAL
WORKING EXPERIENCE
• MATHS TEACHER:MIDRAND HIGH SCHOOL:AUG 2007 – PRESENT
• MATHS TUTOR :POLYTECHNIC OF NAMIBIA:JAN 2007 – JULY 2007
• MATHS TEACHER
ANSA INTERNATIONAL COLLEGE(PRETORIA)
SPORTS QUALIFICATIONS
• CERTIFIED SWIMMING LIFE SAVER
• LEVEL ONE SOCCER COACH
• LEVEL ONE SOCCER REFEREE
• CERTIFIED BASKETBALL COACH
REFEREES
MR GERALD KABASA PROF M. B. PETROV
82 VIA VERCELLE MATHS DEPARTMENT
NAIVASHA ROAD UNIVERSITY OF ZIM
SUNNINGHILL PO BOX MP167
JOHANESBURG MOUNT PLEASANT
CELL: 0839902527 HARARE
TEL: +2634303211
MR RALEPHATA MR BOTHA
SGB CHAIRMAN DANSA COLLEGE
MIDRAND HIGH SCHOOL PO BOX 56565
P O BOX 4730 ARCADIA 0007
HALFWAY HOUSE PRETORIA
MIDRAND TEL: (012)320 4677
CELL: 0823761703EDZAI CONILIAS ZVOBWO 07 oct 2008, 06:23 - Signaler un abus -
Electrical and Communications Engineer
Ahmad Salim Al Basouni Al Masri
Lebanon , Beirut
Mazraa , Barboor street
Wehbe building
Home : +961 1 653092
Mobile: +961 70 614722
[email removed]
http://engahmad.blogspot.com/
Objective:
An opportunity with a growing company in the field of Telecommunications,
Engineering Management , or Embedded Systems.
Education:
Beirut Arab University
Communication and Electronics Engineering
Fresh Graduate as from 25/6/2009 Forth year Average: 86.25 %
Experience: 1- More than two years hands-on experience in ATMEL AVR
2- Two months Erricson switching internship at Ogero Lebanon
3- One month internship at “Rafik Al Hariri International Airport”
4- 6 weeks internship at EDM co. (Engineering Design and manufacturing)
5- Orcad Capture and Layout Design : 2 years experience
6- Soldering and PCB fabrication Experience
7- BAU Engineering Day experience for three years.
8-Contests Entered
Circuit Cellar wiznet contest 2007 Distinctive Excellence Award Winner
(check http://www.circuitc.../winners/DE/index.html)
9- Projects Achieved
* SMS Controller and interfacing with nokia
* TCP and UDP over AVR
* LED MATRIX DISPLAY using AVR
* IR RC5 control using AVR
* 2-Way Intercom
* Built a microprocessor system
10-Ongoing or Future Projects
* Exploring FPGAs
* Wireless sharp Certification
* CWNA Certification
* PMP Certification (a long term interest)
11-Some of my Graduation Project Interests
* USB interfacing using MCU HOST
* Wireless sensor networks
* Security Systems
* Ethernet Control
* Exploring wireless protocols (Zigbee and Bluetooth)
Additional Training (Cources and Certificates Besides my Education):
1- Cisco CCNA Academy Certificate
• CCNA 1 & CCNA 2 & CCNA 3 & CCNA 4
• Eligible for a letter
2- AVR basics extensive course
• AVR Programming basics , timers and Interrupts
3- AVR Advanced course
• USART protocol
• SPI protocol (SERIAL PERIPHERAL INTERFACE)
• I2C protocol (Inter Integrated Circuit Communication)
4- PCB extensive course
• OrCAD Capture and Layout
• Some Prototype Fabrication Techniques
5-FPGA and CPLD course
• fair VHDL training
• Worked with Xilinx Webpack and Mentor Graphics FPGA Advantage
6-Matlab Basics Course
• Basic Matrix Operations and GUI
• Communications Blocks
6-Fair knowledge dealing with
• OrCAD Pspice
• Microsoft Office Word, PowerPoint, and Excel .
• AutoCAD 2004
• Photoshop CS3
Community: A three years IEEE member
• A member in the Engineering day committee
Languages: English Write, read and speak fluently
Arabic My native language
Hobbies: 1- Football, Basketball, Swimming
2- Embedded systems Design
3- Reading Communications magazines
Awards: Circuit Cellar 2007 Embedded Ethernet Contest
“Distinctive Excellence Award”
References: Available upon requestAhmad Salim Al Basouni Al Masri 08 oct 2008, 09:02 - Signaler un abus -
Electrical and Communications Engineer
Ahmad Salim Al Basouni Al Masri
Lebanon , Beirut
Mazraa , Barboor street
Wehbe building
Home : +961 1 653092
Mobile: +961 70 614722
[email removed]
http://engahmad.blogspot.com/
Objective:
An opportunity with a growing company in the field of Telecommunications,
Engineering Management , or Embedded Systems.
Education:
Beirut Arab University
Communication and Electronics Engineering
Fresh Graduate as from 25/6/2009 Forth year Average: 86.25 %
Experience: 1- More than two years hands-on experience in ATMEL AVR
2- Two months Erricson switching internship at Ogero Lebanon
3- One month internship at “Rafik Al Hariri International Airport”
4- 6 weeks internship at EDM co. (Engineering Design and manufacturing)
5- Orcad Capture and Layout Design : 2 years experience
6- Soldering and PCB fabrication Experience
7- BAU Engineering Day experience for three years.
8-Contests Entered
Circuit Cellar wiznet contest 2007 Distinctive Excellence Award Winner
(check http://www.circuitc.../winners/DE/index.html)
9- Projects Achieved
* SMS Controller and interfacing with nokia
* TCP and UDP over AVR
* LED MATRIX DISPLAY using AVR
* IR RC5 control using AVR
* 2-Way Intercom
* Built a microprocessor system
10-Ongoing or Future Projects
* Exploring FPGAs
* Wireless sharp Certification
* CWNA Certification
* PMP Certification (a long term interest)
11-Some of my Graduation Project Interests
* USB interfacing using MCU HOST
* Wireless sensor networks
* Security Systems
* Ethernet Control
* Exploring wireless protocols (Zigbee and Bluetooth)
Additional Training (Cources and Certificates Besides my Education):
1- Cisco CCNA Academy Certificate
• CCNA 1 & CCNA 2 & CCNA 3 & CCNA 4
• Eligible for a letter
2- AVR basics extensive course
• AVR Programming basics , timers and Interrupts
3- AVR Advanced course
• USART protocol
• SPI protocol (SERIAL PERIPHERAL INTERFACE)
• I2C protocol (Inter Integrated Circuit Communication)
4- PCB extensive course
• OrCAD Capture and Layout
• Some Prototype Fabrication Techniques
5-FPGA and CPLD course
• fair VHDL training
• Worked with Xilinx Webpack and Mentor Graphics FPGA Advantage
6-Matlab Basics Course
• Basic Matrix Operations and GUI
• Communications Blocks
6-Fair knowledge dealing with
• OrCAD Pspice
• Microsoft Office Word, PowerPoint, and Excel .
• AutoCAD 2004
• Photoshop CS3
Community: A three years IEEE member
• A member in the Engineering day committee
Languages: English Write, read and speak fluently
Arabic My native language
Hobbies: 1- Football, Basketball, Swimming
2- Embedded systems Design
3- Reading Communications magazines
Awards: Circuit Cellar 2007 Embedded Ethernet Contest
“Distinctive Excellence Award”
References: Available upon requestAhmad Salim Al Basouni Al Masri 08 oct 2008, 09:03 - Signaler un abus -
mechanical engineer
SAQIB KHURSHID
Mechanical Engineer.
House#1/111 F6 RF colony PAC Kamra (ATTOCK)
[email removed]
0092-331-5363716
0092-323-5069009
Objective
“To pursue a career in a dynamic and progressive organization with job satisfaction by utilization of qualification, skills and experience’’
Academics University of Engineering and Technology, Lahore.
2004 Session
Mechanical Engineering
-------------------------------------------------------------------------------------------------------------
Fizaia Degree College F6 RF PAC Kamra (ATTOCK)
2002-2004
F. Sc. (Pre – Engineering)
-------------------------------------------------------------------------------------------------------------
Govt. Boys High School PAC Kamra (ATTOCK)
2000-2002
Matriculation
First division
77 %
Grade A.
-----------------
First division
74 %
Grade A.
-----------------
First division
74 %
Grade A.
Final
Year project
Analysis Of Defects In Pipes Used In Different Industries And Their Remedies
Internships Heavy Mechanical Complex Texila
Completed technical training in all work shops of corresponding industry with full devotion and received the experience certificate.
Professional Skills
Soft wares
1 C++
Auto CAD
3 MS Office
4 Solid Edge
5 Ansys
.
Extra Curricular
• Best Player of Football.
• Naat Khuwan
References
Available on request.saqib khurshid 25 nov 2008, 06:21 - Signaler un abus -
metallurgy
sir, my name is mohsin and i have 1 year of experiance in megna steel mill pakistan
email adress: [email removed]mohsin 27 nov 2008, 05:54 - Signaler un abus -
Bsc. Metallurgical & Materials Engineer
Address: C/o Saqib Naveed, Mohallah Altaf Shah, H#F-316, Khewra, Distt Jhelum (Pakistan)
CAREER OBJECTIVES:
To obtain a challenging and responsible position in the organization and contribuite to the development of the organization with continuous hard work, commitment and dedication.
PERSONAL DETAILS:
Fathers Name: Mehmood Ahmad Malik
Date of Birth: 28-03-1982.
N.I.C. No: 37202-2053007-1
Cell No. /Contact No. 0345-4428395 / 0346-5846977
E-Mail: [email removed]
EDUCATION AND QUALIFICATION:
Degree Year of Obtained Total %age Marks Institute
Passing Marks Marks
B.sc Metallurgical & Materials Engineering
First Year 2001 917 1250 73.36
Second Year 2002 935 1250 74.80 U.E.T
Third Year 2003 916 1250 73.28 Lahore
Fourth Year 2004 1009 1300 77.61
Overall Percentage in B.sc Metallurgical & Materials Engineering = 74.79%
Higher Secondary School Certificate (Pre-Engg)
HSSC 2000 790 1100 71.81 Al-Biruni Govt.
College,PDKhan, Jhelum
Secondary School Certificate (Science Group)
SSC 1998 600 850 70.58 PMDC Model High
School, Khewra, Jhelum
PROJECT:
Final Year Project: Effect of time and temperature on case depth of steel.
FIELD OF INTEREST:
Mechanical Fabrication, Welding, Failure analysis of the parts during working, Heat treatment, Physical Metallurgy, Oil & Gas extraction/exploration, Information Technology etc.,
PROFESSIONAL EXPERIENCE:
Basic Trainings:
1. 3-weeks training at ICI Soda Ash Chemical in Pipe fitting (From June 2003-July 2003).
2. 4-weeks internship at HMC Taxilla in Steel Melting & Casting Section (From June 2004-July 2004).
WORKING EXPERIENCE:
1. 2-years experience in New Shalimar Steel, 20-km Sheikhupura Road Lahore as Shift Incharge (From March 2005 - June 2007).
JOB RESPONSIBILITIES:
1. To scrutinize the steel grade manufactured & to maintain Specification of plain carbon steel as laid down in ASTM standards.
2. To Carry out the heats at Continuous Casting Machine (CCM) plant.
3. To monitor the melting process at High Frequency Induction furnace.
4. To analyze and inspect the defects in billets lets (125 x 125mm, 160 x 160mm,100 x 110mm) and explore their remedies.
2. Working in OGRA (Oil & Gas Regulatory Auhtority), Islamabad since June 2007 (TILL DATE).
JOB RESPONSIBILITIES:
1. To comply /enforce the CNG sector to follow the Rules as laid down in the Provisions of Pakistan CNG Rules, 1992 and take necessary action to ensure public safety & Interest.
2. Visiting CNG stations for inspections.
OTHERS ABILITIES:
1. Fluent in speaking English
2. Having good practical knowledge of MS Word, MS Excel, MS Power Point.
EXTRA CURRICULAR ACTIVITIES
1. Playing Cricket, Cards, Carum
2. Member of Dramatic Society during academic session.
3. Internet surfing, books reading.Sallar Naveed 03 déc 2008, 01:55 - Signaler un abus -
Jobs for New Graduate students with no work experience
Greetings. i am Wisdom Gondo, i am currently concluding a degree program in Management of business in Russia( in the Russian medium). i am desperatly looking for companies that employ trainee graduates with no experience of work.
CURRICULUM VIRTUE
Surname : Gondo
Forename : Wisdom
Date of birth : 29 March 1984
Marital status : single
Tel : (+7) 89515471908
Email : [email removed]
Educational Qualifications
‘O’ Level
Daramombe high school 1997-2000
Subject
Commerce, Geography,Integrated science, Agriculture, Mathematics, Computer science, Biology, English language, English literature, History, Shona
‘A’ Level
Daramombe high school 2001- 2002
Subject Grade
Computer science, Management of business, B
Mathematics
University Level
Voronezh State University
Certificate in basic programming - Visual basic programming
Certificate in Russian language proficiency - Russian language.
Additional information : I am currently finishing my degree program in management of business. I will be available starting from 01/07/2009.
In our university I am currently one of the nine member council of foreigners in Voronezh which leads and guides the students from all over the world on how to live in harmony within the Russian society and we try to protect the interests of foreigners, I am also the President of all the African students in Voronezh . In my last two years of high school, I was the school basketball club captain. All the positions that I have held helped me to get along with the different characters in the societies I have stayed and also gave me confidence in problem identification and solving.
Referees
Mrs Ludmila Petrovna
Fredrek Engels St 10
Voronezh
Russia(4732)525752
394000Wisdom Gondo 31 déc 2008, 02:47 - Signaler un abus -
MECHANICAL ENGINEER (PIPING &PIPPE LINE)
HI BRO, ME NOOR UL HAQ JAMALI I HAVE 7 SEVEN YEARS EXPERIENCE IN OIL & GAS SECTOR IN PIPING &PIPE LINE HAVE U ANY SUTIABLE JOB ABORD PLZ CONTACT ME
THANKS
[email removed]noor jamali 10 jan 2009, 12:03 - Signaler un abus -
fresh graduate
mechatronic engineer is old department in japan nd europ country and is now in egypt and other arabian country is consist of electronic +electricl +control + mechanical .
this department is like robotics and machine designer but i like to work in control and instruments engineerahmed kotub elshemly 17 jan 2009, 06:56 - Signaler un abus -
recherche de job à léetranger
bonjour je suis ivoirienne agée de 40 ,j'ai besoin d'aller travailler au canada ou à londres je suis une femme très trèe compétante ,jai envis de mettre mon expérience dans tuos les domaines du travail voici mon numero de téléphone +22509376458 ou encore mon adresse électronique [email removed]
bozoma solange 21 jan 2009, 03:22 - Signaler un abus -
demande d'aller travailler à l'étranger
bonjour je suis une femme agée de 40ans et j'aimerais enseigner dans le pré-scolaire et le primaire voici mon numero de telephone+22509376458ou à l'adresse electronique [email removed]
bozoma solange 21 jan 2009, 03:46 - Signaler un abus -
computer system engineer
sir,my name is Bhagchand by cast oad rajput religion Hindu.i have done my B.E in computer system with 1st division from Mehran UET jamshoro pakistan in 2008.sir im fresh gaduate so i want to study abroad for master degree in canada,uk or USA but i can't afford.my father n mother has died.can u help me.i will thank full to u.
bhagchand 21 jan 2009, 07:43 - Signaler un abus -
computer system engineer(Fresh graduate)
sir,my name is Bhagchand by cast oad rajput religion Hindu.i have done my B.E in computer system with 1st division from Mehran UET jamshoro pakistan in 2008.sir im fresh gaduate so i want to study abroad for master degree in canada,uk or USA but i can't afford.my father n mother has died.can u help me.i will thank full to u.
email id:[email removed]Bhagchand 08 fév 2009, 07:41 - Signaler un abus -
travail à l'etranger
voila je suis un ingenieur en mecanique specialiser sur les machines tournant et je suis former par l'entreprise sonatrach dans le domaine petrolier.
lamri mokhtar 15 fév 2009, 05:09 - Signaler un abus -
software engineer
hi sir my name is rafique andi i have done my BE in software engineering and my interested fields are web designing and i have worked in dreamweaver 8,php designer and many other graphic softwares the languages that i have learned are PHP,MYSQL,JAVASCRIPT,HTML,CSS,ORACLE 9i and my final year project was electronic voting system
rafique_umrani@yahoo.com 19 fév 2009, 01:14 - Signaler un abus -
Mechanical Engineer
Dear sir I am a Fresh Mechanical Engineer. i want to apply for the post Trainee Mechanical engineer.
[email removed]muhammad Irfan 20 fév 2009, 03:48 - Signaler un abus -
Communications and Electronics Engineer
Dear sir I am a Fresh Communications Engineer. i want to apply for the post Trainee Electrical engineer.
I graduated from Jordan University of Science and Technology
Rating: Very Good
training courses:MCSA
CCNA
[email removed]
Thanks10 02 mars 2009, 03:30 - Signaler un abus -
Industrial Engineer
Hello, I´m a Fresh Industrial Engineer. I´m Looking For a Job. I´m from Venezuela. 25 years Old. Single. [email removed]
Ing. Pablo 06 mars 2009, 12:08 - Signaler un abus -
chemical engineer
hi i am ahmed mohammed reda
22 years
fresh chemical engineer
i am looking to work in any thing related with chemical engineering
please if any one have information send it to : ([email removed])ahmed 07 mars 2009, 06:36 - Signaler un abus -
JOB OFFER 2009
ATTENTION:
CANADA EMPLOYMENT OPPORTUNITY WITH ROYAL CRUISE LINE.INC.2009
ON BEHALF OF ROYAL CRUISE CORPORATION CANADA, WE HEREBY SEEKING FOR GROUP OF
ABLED MEN AND WOMEN TO COME AND WORK IN OUR CRUISE COMPANY IN CANADA.
THE COMPANY'S MANAGEMENT WILL TAKE CARE OF THE GROUP FLIGHT
TICKETS,FEEDING,ACCOMMODATION AND GOVERNMENT TAXES.
NOTE,DUE TO THE PROBLEM THAT PEOPLE FROM THIRD WORLD COUNTRIES ENCOUNTERS IN GETTING VISA FROM US & CANADA EMBASSY,IN EYES OF THIS, THE MANAGEMENT HAS CONVEYED AN OFFICIAL ARRANGEMENT WITH
CANADIAN IMMIGRATION AUTHORITY FOR ISSUANCE OF VISA WORLD WIDE TO THOSE WHO NEEDS VISA TO ENTER CANADA ON BEHALF OF OUR COMPANY'S
INVITEE UPON PRESENTATION OF THE RELEVANT DOCUMENTS THAT EMPOWERS YOU TO COME IN HERE.
THE NATURE OF THE WORK ARE AS FOLLOWS AND THE SALARIES SCHEDULES
EXCLUDING GOVERNMENT TAXES WHICH IS BEING TAKEN CARE OF BY THE MANAGEMENT.
WE ARE GLAD TO WELCOME YOU IN CANADA AND YOU EXPECTED TO WORK WITH US WITH 100%FAITHFULNESSSS.
IF YOU REQUIRE FURTHER INFORMATION OR CLARIFICATION IN ANY POINT, DO NOT HESITATE TO ASK AND TO THIS END, WE WAIT FOR YOUR URGENT RESPONSE.
E-mail:[email removed]
SINCERELY YOURS
MRS.FAROOQUE ROSENBERG
RECRUITMENT OFFICER
ROYAL CRUISE LINE.INCROYAL 11 mars 2009, 03:59 - Signaler un abus -
Mechanical engineer
To seek career as Mechanical engineer in a progressive environment that can help
to improve my technical, creative and managerial skills and to meet the competitive
Industry needs through self motivation and result oriented approach.
[email removed]Hassan Khalil 23 avr 2009, 02:56 - Signaler un abus -
MECHANICAL ENGINEER PLUS PROJECT MANAGEMENT GRADUATE
Hi, i am gurpreet singh , i have done mechanical engineering from india in 2008 and currently persuing post grad in canada ,humber college, and i will be a project management graduate in aug 2009.Currently i am looking for a job related to mechanical industry or HVAC industry, where i can successfuly utilize my technical and management skills aswell.
I have a working experience of 8 months in an automobile part manufacturing industry for the leading indian two wheeler company{ hero honda }.I have also worked on many projects during my job and as a part of my bachelor degree.
email: [email removed]Regards Gurpreet Singh 26 avr 2009, 10:22 - Signaler un abus -
mechatronics engg
i need a person to guide me in msc mechatronics subjects. contact [email removed]
urgently required 02 mai 2009, 01:52 - Signaler un abus -
b com
hi my name is abbas ali im graduate and i want to go usa its great country pl inform me job like me
E mail: [email removed]
CELL no is +919998058057abbas ali tinwala 25 juin 2009, 06:36 - Signaler un abus -
Mechanical Engineer and a PRO/E Designer
RESUME
EBRON SHAJI.G.T
Email:
[email removed]
Address for Communication:
Ebron shaji.G.T,
Mispha House,
Kanjampuram(P.O),
Kanyakumari Dist,
Tamilnadu,
India 629154.
Contact No:
Residence : 04652-222325
Mobile : 91-9345939583
Personal Profile :
Father’s name : Mr.R.Gnanasigamony
Date Of Birth : 06:03:1988
Sex : male
Nationality : Indian
Marital Status : Single
Languages : English, Tamil, Malayalam.
Objective:
Seeking challenging responsibilities in a professional environment where my analytical, application knowledge and problem solving skills can be put in for the mutual growth of the organization and myself.
Academic Profile:
B.E (Mechanical Engineering)---------- 75.95%
(2005-2009)
Vins christian College of Engineering, Chunkankadai.
HSC(12th standard)------- 71.5%
(March 2005)
Mar Gregorius Matric Higher secondary school Kirathoor.
SSLC(10th standard)--------67.7%
(march 2003)
Mar Gregorius Matric Higher secondary school Kirathoor.
Background Courses:
Diploma in 3D Modeling and Analysis
at CADD Centre Training services, Nagercoil.
Course duration from July 2008 to December 2008
Course includes,
Modeling using Pro/E.
Part Analysis using Ansys.
Project detail:
Project Title : Avoiding hot correction on header stub due to distortion
Description : To improve the quality and productivity of the production on boiler header stubs.
Company : Barath Heavy Electrical Limited, Tiruchy.
Field : Boiler and Pipe lines.
Duration : For one month from 10th January 2009 to 10th February 2009.
In-plant Training Undergone:
Tamil Nadu State Transport Corporation (Madurai), Limited,
Nagercoil Region - 629001
Duration for 5 days
Kumaran Automobiles, Tata passenger car sales and maintenance, Nagercoil.
Duration for 6 days.
Presentations and Participations:
Presented a technical paper on “Ethanol an Alternative Fuel” at St.Xaviers Catholic College of Engineering
Participated in Solid Works design contest held at St.Xaviers Catholic College of Engineering
Skills Profile:
Highly motivated, self managed and creative
Excellent written and oral communication skills
Good proficiency on Auto CAD drawings
Proficiency in MS Office Suite (Word, Excel, Access, and PowerPoint)
Internet knowledge
Declaration:
I here by declare that the information furnished by me is true and correct to the best of my knowledge and belief.
Place: Nagercoil
Date: 22-05-2009
(EBRON SHAJI.G.T)
Reference:
Mr.Pradeep M.Tech
Professor
Department of Mechanical Engineering
Vins Christian college of Engineering
Chunkankadai, Nagercoil.Ebron Shaji.G.T 30 juin 2009, 02:22 - Signaler un abus -
My name is Muhammad Fahad
Muhammad Fahad.
OBJECTIVE Seeking a position in an organization for utilizing my knowledge and experience for organizational as well as personal growth. I have extensive ability in winning my company objectives, team members and clients due to interpersonal communication skills. I have a capacity & flexibility of working any where in Pakistan.
PROFESSIONAL EXPERIENCE
PTCL WLLFranchise (wali communication) Jhelum
Now I am doing Job in PTCL franchise till now
ZONG Franchise ( U & V ASSOCIATE) Jhelum
I have ONE MONTH experience as (CUSTOMER SERVICE REPRESENTATIVE) in ZONG Franchise Jhelum. (Pakistan)
(SIMS, BYN, PREPAID CARDS, E-TOP UP) issuance and provide perfect guiding to customer about system related problem and keeping record of stock in hand and the stock issued to customers.
These above responsibilities are included my duty in Franchise.
ZONG CMPak Limited ( PAKTEL)
I have completed my internship as (ASSISTANT DISTRIBUTION EXECUTIVE) starting from July 2008 till October 2008 in ZONG, China Mobile Company. in Jhelum Regional Office in the S & D Department (Regional store)
My Main areas of responsibilities include:
Issuance of stock to franchises i.e. Prepaid cards, Sims, Handsets and transfer of Mini Load balance.
Keep a record of stock in hand and the stock distributed to franchise in order to keep check and balances
Proper filling of documents for future reference and record keeping.
I am proud to be part of a Company who has successfully launched their own handset in the telecom industry, and during launch I have learned a lot from my fellow colleagues.
SHAN Garment Center Jhelum
I have also seven years experience as salesman in a Garment shop.
EDUCATION
B. A in process
• Currently I am doing my Bachelor in arts from Allama Iqbal Open University.
F. A Faculty Of Arts 2007
• Completed the intermediate level in 2007 from Allama Iqbal Open University, Islamabad.
From Allama Iqbal Open University Islamabad in HUMAN RIGHTS, GENERAL SCIENCE, ISLAMIAT, SECRETARIAL PRACTICS, PRINCIPLES OF COMMEREC, HOME MANAGEMENT & HOME FURNISHING.
Matriculation {SCC} 2003
• Done matriculation from Govt Tabligh ul Islam High school Jhelum
From Rawalpindi Board in Arts subjects.
Computer Courses
IT Basic 2007
From Computer City 10.A Civil line Jhelum in Microsoft Word, Microsoft Excel, Microsoft Power Point, Internet Training.
AUTO CAD 2007
From Computer City 10.A Civil line Jhelum in Civil Structural, Mechanical, Architectural Creating & Editing Drawings, Using Dimension, Using Advance 3D Features.
INTEREST AND ACTIVITIES • Playing cricket and soccer and gaming on compute.
• Deftness in operating computer software packages like Microsoft Excel, Word, Power Point, and other window based computer applications.
PERSONAL DATA Born on 1st December 1981 at Jhelum Pakistan.
Status : Single
Religion : Islam
Nationality: Pakistani
N.I.C # : 37301-2299506-7
Hobbies include computers, reading & sporting activities
LANGUAGES English, Urdu and Punjabi.
REFERANCES Will be furnished on requestmuhammad fahad 30 juin 2009, 09:57 - Signaler un abus -
job in canada
Respected sir,
I have done B.pharma.Now i am working in India as a medical representetive.I have 7 years of experience in pharma and healthcare.I will be greatfull if you can provide me a job in canada.
with regards
Rajesh rajRajesh raj 06 juil 2009, 10:55 - Signaler un abus